Frequently Asked Questions
Click a frequently asked question below to see the answer.
Bag does not stay on pool floor.
1. Verify that the bag has been installed correctly.
2. Check for air bubbles around the jet body assembly. This may indicate air in the plumbing lines.
3. Ensure the jets are spraying evenly.
4. Verify that the water pressure is between 5 and 10 psi.
Note: The cleaner is operating too fast if the sweep hose and bag are not in contact with the pool bottom a majority of the time and the surface module changes directions more frequently than every 15 to 25 seconds. In this case, unscrew the pressure relief valve until the surface module slows down.