Polaris 9300 Sport

The Polaris 9300 Sport robotic provides exceptional pool cleaning performance.

Find a Dealer

The Polaris 9300 Sport robotic provides exceptional pool cleaning performance.

Featuring Vortex Vacuum Technology, the cleaner is able to pick up larger debris, quickly, while maintaining maximum suction. The large, all-purpose canister captures more than four times the debris load of other cleaners. The 9300 provides maximum energy efficiency, costing just pennies per day to operate. Additinally, the 9300 Sport has a unique top-load large capacity debris canister that can be easily emptied with a simple shake and spray convenience, so you never have to touch debris again!

The Polaris 9300 Sport not only looks sleek and stylish, but also includes a heavy duty matching caddy for easy transport and storage, and is backed by a 2 year limited warranty. Includes a 110v transformer, 60ft cord and filter canisters.


  • Vortex Vacuum Technology keeps debris suspended for long-lasting suction and superior cleaning performance
  • Simple shake and spray filter cleaning means you will never touch debris again!
  • Top access, large, all-purpose filter canister has four times the capacity of other similar cleaners
  • Cleans pool floor, walls, and tile line, scrubs tile with pleated scrubbing brush
  • Includes two cleaning cycles (1.5, 2.5 hrs)
  • Includes heavy-duty transport/storage caddy
  • Cleans all pool surfaces. For pools up to 50 ft. in length
  • 2 year warranty


Model Description
F9300 Polaris 9300 Sport Robotic Pool Cleaner

Exploded Parts Diagram

Automatic Pool Cleaners

Polaris 9300 Robotic Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

Learn More

Frequently Asked Questions

Click a frequently asked question below to see the answer.

Cleaner doesn't climb the pool sides
1. The filter is full or dirty and must be cleaned following the procedure Section 5.1 of the owner's manual, "Cleaning the Filter Canister". 2. Microscopic algae are causing the pool side to become slippery. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.
Cleaner doesn't stay firmly on the pool bottom.
There is air in the appliance casing so you must submerge the cleaner following the procedure in Section 4.1 of the owner's manual, "Submerging the Cleaner".
How to connect new control unit to original caddy
1. Position the new control unit over the control unit hook on the caddy. 2. Place the locking plate on top and line up the screw holes. Start both screws prior to tightening completely. Secure the plate using Phillips head screws. Do not over tighten. 3. The transport caddy is now ready to use.
Flashing indicator lights appear just after start (pressing the Power or Cycle button to start cleaner) (<20 seconds).
1. Ensure the floating cable is properly plugged into the control unit. 2. Ensure the cleaner is well sub-merged. 3. Cleaner may need to be reset and start new cycle. 4. Ensure the propeller is turning. 5. Ensure the wheels are turning.
Flashing lights appear during cycle.
If the cleaner is sucking air for 60 seconds the flashing lights appear. Submerge the cleaner following the procedure in Section 4.1 of the owner's manual, "Submerging the Cleaner".
On startup cleaner doesn't move.
1. The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity. 2. Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the problem persists, contact your local Polaris service representative.
The cycle 1 and 2 program indicators flash alternately.
1. The brushes have become smooth and you need to replace the brushes following the procedure in Section 5.3 of the owner's manual, "Replacing the Brushes". 2. Filter canister is full or dirty so you must clean the filter canister following the procedure in Section 5.1 of the owner's manual, "Cleaning the Filter Canister". 3. Floating cable is excessively coiled or kinked. Make sure the floating cable is spread out over the pool.


9300 Robotic 4-Page Brochure

Item #: SL1500
File Size: 7814360

Download View Online

9300 Robotic Owner's Manual

Item #: TL-1501
File Size: 3738488
Description: Languages: ENG/FR/ESP

Download View Online

Pro Resources

Log in to your Fluidra Rewards account now to get access to pro resources.

Log in Now