Polaris 9300xi Sport

The Polaris 9300xi Sport is the premium robotic cleaner choice for those who want total pool control.

Find a Dealer

The Polaris 9300xi Sport is the premium robotic cleaner choice for those who want total pool control.

The 9300xi Sport has all the features and benefits of the 9300 Sport plus unsurpassed intelligence. With the handheld remote, you can control when and where it goes for a perfectly clean pool. Use the remote to spot clean, or, simply set it and forget it with pre-programmed cleaning cycles. Choose from custom-programmed automated cleaning mode (1.5 or 2.5 hrs).

The 9300xi Sport has a unique top-load large debris canister that can be easily emptied with a simple shake and spray convenience. Never touch debris again!

The Polaris 9300xi filters up to 70-gallons per hour, and cleans the average sized pool in 1-1/2 hours. This unit includes a premium quality storage caddy constructed of heavy gauge alloy and is backed by a 2 year limited warranty.


  • Vortex Vacuum Technology keeps debris suspended for long-lasting suction and superior cleaning performance
  • Top access, large, all-purpose filter canister has four times the capacity of other similar cleaners
  • Cleans pool floor, walls, and tile line, scrubs tile with solid non-pleated scrubbing brush
  • Includes remote control for spot cleaning or choose from 2 cleaning cycles (1.5 or, 2.5 hrs)
  • Cleans all pool surfaces, pools up to 60 ft. in length, 2 year warranty


Model Description

Exploded Parts Diagram

Automatic Pool Cleaners

Polaris 9300xi Robotic Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

Learn More

Frequently Asked Questions

Click a frequently asked question below to see the answer.

Cleaner doesn't climb the pool sides
1. The filter is full or dirty and must be cleaned following the procedure Section 5.1 of the owner's manual, "Cleaning the Filter Canister". 2. Microscopic algae are causing the pool side to become slippery. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.
Cleaner doesn't stay firmly on the pool bottom.
There is air in the appliance casing so you must submerge the cleaner following the procedure in Section 4.1 of the owner's manual, "Submerging the Cleaner".
How to connect new control unit to original caddy
1. Position the new control unit over the control unit hook on the caddy. 2. Place the locking plate on top and line up the screw holes. Start both screws prior to tightening completely. Secure the plate using Phillips head screws. Do not over tighten. 3. The transport caddy is now ready to use.
Flashing indicator lights appear just after start (pressing the Power or Cycle button to start cleaner) (<20 seconds).
1. Ensure the floating cable is properly plugged into the control unit. 2. Ensure the cleaner is well sub-merged. 3. Cleaner may need to be reset and start new cycle. 4. Ensure the propeller is turning. 5. Ensure the wheels are turning.
Flashing lights appear during cycle.
If the cleaner is sucking air for 60 seconds the flashing lights appear. Submerge the cleaner following the procedure in Section 4.1 of the owner's manual, "Submerging the Cleaner".
On startup cleaner doesn't move.
1. The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity. 2. Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the problem persists, contact your local Polaris service representative.
Remote control doesn't work
1. The batteries in the control are dead and need to be replaced. 2. The remote control is not synchronized to the control unit. When replacing the control unit or the remote control, it is necessary to synchronise the new remote control with the control unit: 1. Connect the cleaner to the control unit, then plug the control unit to the receptacle. 2. Press OFF + Cycle 1 buttons for more than 6 seconds until both lights flash once. 3. Press and hold the "rotate right" button on the remote control unit. 4. The light on the right will flash 5 times then both lights will flash together. 5. The synchronization procedure is completed when both lights switch off.
The cycle 1 and 2 program indicators flash alternately.
1. The brushes have become smooth and you need to replace the brushes following the procedure in Section 5.3 of the owner's manual, "Replacing the Brushes". 2. Filter canister is full or dirty so you must clean the filter canister following the procedure in Section 5.1 of the owner's manual, "Cleaning the Filter Canister". 3. Floating cable is excessively coiled or kinked. Make sure the floating cable is spread out over the pool.


9300 Robotic 4-Page Brochure

Item #: SL1500
File Size: 7814360

Download View Online

Item #:
File Size: 3524516

Download View Online

Polaris 9300/9300xi O/M Addendum

Item #: H0357000
File Size: 125236

Download View Online

Pro Resources

Log in to your Fluidra Rewards account now to get access to pro resources.

Log in Now